Power Cable
HCTS-6000A/8.33V/50kVA Heating Transformer for Power Cable
Home > Systems > Heat Cycle Test System > Heating Transformer > Power Cable

HCTS-6000A/8.33V/50kVA Heating Transformer for Power Cable

Lead time: 40 days

Mode: HCTS-6000A/8.33V/50kVA
Open type, PortableSingle phase (a.b)
Frequency: 50Hz
Rated Capacity: 50kVA                                   
Rated Voltage: excitation winding: 0.4kV;      One winding current: 8.33V
Rated Current: excitation current: 125A        One winding current: 6000A
Waveform deviation ≤5%
Impedance voltage ≤1.5%
Over Current Ability: Continuous working for 5 minutes at 110% rated current, then thermal damage or distortion of the winding shall not be
Noise: ≤65dB
Dielectric loss: less than 0.5%.
Operating Time: Continuous working under 100% rated current; and temperature rise of transformer windings is less than 65K,
temperature of coil to oil less than 55K.

heating transformer heating transformer

heating transformer heating transformer

Notice 1:
We only list several model on the website, if user need other capacitance(output voltage, and current), we can customized accordingly. 
Notice 2:
For power cable heating cycle test, we normally, the cable length is 30m, but if user need to test longer cable, if the cable cross-section is not too big, user can wiring several or multiple turns cable in the heating transformer to get higher voltage and output power. 
Heating Cycle Test EquipmentHeating Cycle Test Equipment

Where To Buy

Related Photos