HIVG 1200KV-30KJ Impulse Voltage Generator

Mode: HIVG 1200KV-30KJ

Related Standards: 
* IEC 60060-1-2010 High-voltage test techniques - Part 1: General definitions and test requirements
* IEC 60060-2-2010 High-voltage test techniques. Part 2: Measuring systems
* IEC 61083-1-2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
* IEC 61083-2-1996 Digital recorders for measurements in high-voltage tests - Part 2: Evaluation of software
* ANSI/IEEE 4a-2001 Techniques of High-Voltage Testing
* ANSI/IEEE 376-1975 Measurement of Impulse Strength and Impulse Bandwidth
* ANSI/IEEE 1122-2007 Digit Recorders for Measurements in High-Voltage Impulse Tests
* ASTM D69-D2484 Electrical Insulation (Ⅰ)
* ASTM D2518-Latest Electrical Insulation (Ⅱ) 

Technical Parameters: 
1) Rated Voltage: ±1200KV
2) Rated stage voltage: ±150KV
3) Rated energy: 30KJ
4) Total impulse capacity: 0.040625uF (single impulse capacitor: 0.65uF/75KV)
5) Output impulse voltage waveform:
     a). 1.2/50us lightning impulse voltage waveform; voltage level is no less than 1080KV
     b). Steep of Steep waveform is no less than 1200KV~1500KV/us; voltage level is no less than 600KV;
           Impulse voltage waveform parameters and its deviation meet requirements of National Standards;
6) Continuous working time:
     > 2/3 rated voltage, every 90s charging and discharging one time can be continuous working;
     < 2/3 rated voltage, 45s charging and discharging is enough.

Principle Diagram: