HSS-11 Standard Dielectric Loss Calibrating Device

HSS-11 Standard Dielectric Loss Calibrating Device

Description：

The dielectric loss factor set is widely used so tests in which the HV electric bridge is used are increasing. For instance, use automatic test set to detect insulation performance of electric equipment (motor, transformer etc). However, some operators tend to doubt test results. At this time, the bridge should be sent to the organization for calibration. But it is hard to do that. Based on that situation, this dielectric loss factor test set was designed. This test set can be used as test object; test results are compared with the previous ones so that the reasons for data deviation are identified. Thanks to high stability and accuracy, the set is easy to use indoors and outdoors.

Equip 11 grade for capacitance & Tan Delta Bridge self calibrating:
Grade 1:  1x10^-4
Grade 2:  3x10^-4
Grade 3:  5x10^-4
Grade 4:  1x10^-3
Grade 5:  3x10^-3
Grade 6:  5x10^-3
Grade 7:  1x10^-2
Grade 8:  3x10^-2
Grade 9:  5x10-²
Grade 10:  0
Grade 11:  Gas Insulated Standard Capacitor 1x10-^{5
The Gas Insulated Standard Capacitor for the device is 10kV 100pF. (More requirement can be customized.)}